solderable high temperature enameled wire

4.7

Soderex 180 Magnet Wire – EIS

Learn more »

requiring both high thermal resistance and low soldering temperatures. SODEREX®/180 magnet wire consists of a solder-strippable modified polyurethane film…

Magnet – Wire & Cable from Allied Electronics

Learn more »

Belden WIRE, MAGNET, HIGH-TEMPERATURE, 14AWG, POLY-THERMALEZE COATED CLEAR (TRANSPARENT. Mfr's Part #: 8073. Allied Stk #: 70004232…

Magnet Wire Insulation Guide – MWS Wire Industries

Learn more »

Solderable polyester Nylon polyester imide Bondable polyester amide imide Bondable. Solderable polyester Bondable. Dacron Glass High Temp polyester 200.

Termination Methods for Litz Wire – New England Wire

Learn more »

Jul 1, 2007 … Solderable Litz wire is constructed from Magnet wire that has a solderable … At the high temperatures used to remove the enamel from each…

Solidon – Superior Essex

Learn more »

requiring both solderability and high thermal resistance. Solidon® magnet wire is a solder-strippable insulation consisting of a … Temperature Temperature Flow.

NEMA Magnet Wire Thermal Class Ratings – Superior Essex

Learn more »

magnet wire to resist cracking when exposed to rapid temperature … 20°C higher than the class temperature of the wire insulation type. …. Not for high current or high temperature applications … Solderable wire insulation with higher thermal.

Impossible to solder enamelled wire! – Head-Fi

Learn more »

I have never in all that time been able to solder the wires so they … a temp controlled soldering iron can melt the enamel off, or a solder pot,…

Insulation Film Enameled Guide – HM Wire International, Inc.

Learn more »

This magnet wire insulation exhibits high dielectric strength retention under high humidity … consists of a nylon topcoat over a solderable, high temperature.

Best Method to Strip enamel off magnet wire All About Circuits

Learn more »

Nov 7, 2009 … The following comments apply to magnet wire with non-solderable …. can be removed with 50W solderin iron, just set the temperature to HIGH.